ITEM 4274
- MANUFACTURER:
- INTERNATIONAL THERMAL SYSTEMS QUENCH
- TYPE:
- DROP BOTTOM QUICK QUENCH (WATER) & AGE OVEN
- SIZE I.D.:
- 168"(14')W x 168"(14')L x 72"(6')H
- MAXIMUM TEMP.:
- 1200 F
- ELECTRICS:
- 480 VOLTS, KW, 3 PHASE
- CONTROLS:
- PLC CONTROL WITH DIGITAL DISPLAY AND HONEYWELL DIGITAL OVER TEMPERATURE CONTROL
- GENERAL:
- GAS FIRED DROP BOTTOM FURNACE WITH A DESIGN LOAD OF 3000 LBS (RACK & LOAD). HEAT IS SUPPLIED BY (2) RADIANT TUBE GAS BURNERS (1,200,000 BTU/HR MAX TOTAL) AND CIRCULATED BY (2) 20 HP FANS (40,000 CFM TOTAL). AT THE END OF HEAT CYCLE LOAD IS LOWERED IN 15 SECONDS MAXIMUM INTO THE 19,500 GALLON QUENCH TANK . DESIGNED FOR +- 5 F. SYSTEM WAS INSTALLED IN 2012 AND WILL BE REMOVED BY MID JUNE
- F.O.B.:
- LOS ANGELES, CALIFORNIA
- TERMS:
- CHECK WITH PURCHASE ORDER, SUBJECT TO PRIOR SALE. YOUR INSPECTION IS INVITED AND SUGGESTED. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
SA 01/06/2023
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.