ITEM 4249
- MANUFACTURER:
- SAET (AJAX TOCCO) VERTICAL INDUCTION HEATER FOR BEARING RACES, SLEWING RINGS AND GEARS
- TYPE:
- VERTICAL INDUCTION HARDEN, QUENCH & TEMPER SYSTEM
- MODEL:
- 3RVN
- SERIAL NUMBER:
- 105865
- ELECTRICS:
- 460 VOLTS, KW, 3 PHASE
- GENERAL:
- INDUCTION HARDEN, QUENCH AND TEMPER SYSTEM MANUFACTURED IN 2009 FOR HEAT TREATING BEARING RACES, SLEWING RINGS AND GEARS MINIMUM INNER DIAMETER: 47.2" (1200mm) UP TO MAXIMUM OUTER DIAMETER: 314" (8000mm). PART HEIGHT: 3.9-19.7" (100-500mm) , PART WEIGHT: 10-15 METRIC TONS (22,000 TO 33,000 LBS.). AREA TO BE TREATED: SINGLE BALL RACES, DUAL BALL RACES, RECTANGULAR RACES, TRIANGULAR RACES, RING GEARS TEETH (exceptional application). HARDENING CASE DEPTH: BETWEEN 1,6 - 8mm (Reference 48HRc min.). EQUIPMENT SCAN SPEED: UP TO 200mm/sec FOR PART POSITIONING - SCAN SPEED BETWEEN 100 and 1500mm/min. ACCORDING TO THE RACE DIMENSION AND THE HARDENING DEPTH. PART POSITIONING: INCLINED (18") with Part Either "SUPPORTED" or "HANGED" by ROLLERS. HEAT IS SUPPLIED BY A 200 KW @ 2/30 KHZ INDUCTION HEATER. INCLUDED IS AN OUTSIDE WATER COOLING TOWER (FOR INDUCTION HEATER), POLYMER QUENCH COOLING/CLEANING AND MANY INDUCTION COILS. PHOENIX CNC VERTICAL BORING MILL WITH LIVE MILLING USED WITH THIS IS ALSO AVAILABLE.
- F.O.B.:
- BUYER TO LOAD
- TERMS:
- CHECK WITH PURCHASE ORDER, SUBJECT TO PRIOR SALE. YOUR INSPECTION IS INVITED AND SUGGESTED. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
JB 04/16/2024
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.