ITEM 3729
Click Any Image to Enlarge
- MANUFACTURER:
- FB SERIES NEW OVEN
- TYPE:
- CONTINUOUS BELT OVEN
- SIZE I.D.:
- 48"W x 276"(23') L x 24"H
- SIZE O.D.:
- 7'W x 29'L x 9'H
- MODEL:
- FBC184TULE480V800BTUSR
- MAXIMUM TEMP.:
- 500 F
- ELECTRICS:
- 480 VOLTS, KW, 3 PHASE
- CONTROLS:
- WATLOW PM6 SINGLE SET POINT CONTROLLER AND WATLOW PM HIGH LIMIT MOUNTED IN A NEMA 1 AND UL LISTED ENCLOSURE
- GENERAL:
- 48" WIDE VARIABLE SPEED STAINLESS STEEL FLAT WIRE BELT CAPABLE OF UP TO 1200 LB LOAD. HEAT IS SUPPLIED BY A MAXON 800,000 BTU MODULATING GAS BURNER FIRING INTO TOP MOUNTED PLENUM SEPARATE FROM THE WORK CHAMBER. HEATED AIR IS CIRCULATED IN A COMBINATION HORIZONTAL/VERTICAL PATTERN BY A 30" DIA. 5 H.P. 6000 CFM FAN. 4.5" THICK INSULATED WALLS, CEILING AND FLOOR WITH ALUMINIZED INTERIOR, CRS EXTERIOR PAINTED MACHINE GRAY WITH ENDS PAINTED HIGH TEMPERATURE BLACK. 3' OPEN LOADING/UNLOADING. EQUIPPED WITH A 500 CFM FORCED EXHAUST. HAS A SOLVENT RATING OF .500 GALLONS. .
- F.O.B.:
- FACTORY LOCATION
- TERMS:
- 50% WITH PURCHASE ORDER, 50% 5 DAYS PRIOR TO SHIPPING. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
SA 11/07/2023
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
