ITEM 3241
Click Any Image to Enlarge
- MANUFACTURER:
- FB SERIES, GAS FIRED, NEW OVEN
- TYPE:
- OVEN, WALK IN (NEW)
- SIZE I.D.:
- 48"W x 48"L x 72"H
- SIZE O.D.:
- 77"W x 88"L x 84"H
- MODEL:
- FBST496TULG480V400BTURM
- MAXIMUM TEMP.:
- 650 F
- ELECTRICS:
- 240 OR 480 VOLTS, KW, 3 PHASE
- CONTROLS:
- DIGITAL SINGLE SET POINT TEMPERATURE CONTROLLER, DIGITAL HIGH LIMIT CONTROLLER, BATCH TIMER TO SHUT OFF HEAT AT END OF TIMED CYCLE, REQUIRED MOTOR STARTERS, RELAYS, ETC MOUNTED AND PREWIRED IN A NEMA 1 & UL RATED ENCLOSURE ON RIGHT WALL OF OVEN.
- GENERAL:
- DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT IS SUPPLIED BY MAXON APX 400,000 BTU BURNER FIRING INTO A PROTECTED CHAMBER IN REAR OF OVEN. HEATED AIR IS CIRCULATED COMPOUND HORIZONTALLY FROM BOTH SIDE WALLS TO THE REAR WALL BY A 3400 CFM FAN DRIVEN BY A 3 HP MOTOR. OVEN IS EQUIPPED WITH A 600 CFM POWERED EXHAUSTER. OVEN INTERIOR MATERIAL IS ALUMINIZED STEEL WITH PAINTED STEEL EXTERIOR. A STEEL PLATE FLOOR IS STANDARD. OPTIONS: RACKS, CARTS, DISCONNECT BOX, TEMPERATURE RECORDER
- F.O.B.:
- FACTORY LOCATION
- TERMS:
- 50% WITH PURCHASE ORDER, 50% 5 DAYS PRIOR TO SHIPPING. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
SA 06/30/2022
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
