ITEM 4089
Click Any Image to Enlarge
- MANUFACTURER:
- GASMAC CAR BOTTOM
- TYPE:
- CAR BOTTOM
- SIZE I.D.:
- 120"W x 120"L x 102"H
- SIZE O.D.:
- APPROX 22'W x 25'L x 21'H
- MODEL:
- N/A
- SERIAL NUMBER:
- JW020469
- MAXIMUM TEMP.:
- 780 F
- CONTROLS:
- ALLEN-BRADLEY AB1000 CONTROL AND (2) HONEYWELL DIGITAL OVER TEMPERATURE CONTROLS MOUNTED IN A DOUBLE DOOR PANEL.
- GENERAL:
- TWO ZONE GAS FIRED CAR BOTTOM. HEAT IS SUPPLIED BY (2) ECLIPSE 120AH PACKAGE BURNERS (1,250,000 BTU/HR EACH) FIRING FROM THE REAR WALL INTO A PROTECTED CHAMBER ABOVE WORK AREA. HEATED AIR, WHICH IS CIRCULATED BY (2) BELT DRIVEN FANS (35500 CFM EACH) ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF. ELECTRICALLY POWERED WORK CART (116"WIDE EFFECTIVE WORK AREA) HAS A CAPACITY OF 7200 LBS. AIR OPERATED SEALS SEAL THE CAR TO THE FURNACE TO PREVENT HEAT LOSS. MANUFACTURED IN 2002 WAS LAST USED APPROX 4 YEARS AGO TO ANNEAL ALUMINUM TUBING. CAN BE SHIPPED IN (3) PIECES
- F.O.B.:
- BUYER TO LOAD, SOUTHERN ILLINOIS LOCATION
- TERMS:
- CHECK WITH PURCHASE ORDER, SUBJECT TO PRIOR SALE. YOUR INSPECTION IS INVITED AND SUGGESTED. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
SA 05/02/2019
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
