ITEM 4133
- MANUFACTURER:
- T-M
- TYPE:
- VACUUM FURNACE
- SIZE I.D.:
- 12"W x 20"L x 12"H
- SIZE O.D.:
- 7'W x 5'L x 6.5'H
- MODEL:
- SS1213 IV
- SERIAL NUMBER:
- X1705489
- MAXIMUM TEMP.:
- 2400 F
- ELECTRICS:
- 230 VOLTS, KW, 3 PHASE
- CONTROLS:
- Honeywell DCP 700 Digital Control Programmer WITH ALLEN-BRADLEY DL20 PLC, (2) HONEYWELL UDC HI LIMIT CONTROLS AND TELEVAC MM200 DIGITAL VACUUM CONTROLLER MOUNTED IN ENCLOSED PANEL
- GENERAL:
- HORIZONTAL WATER COOLED VESSEL WITH SINGLE SIDE SWING DOOR WITH AIR CLOSERS. ALL METALLIC HOT ZONE, HEATING ELEMENTS AND HEARTH. EQUIPPED WITH A HOLDING AND ROUGHING PUMPS ALONG WITH A DIFFUSION PUMP. AT COMPLETION OF HEAT CYCLE FURNACE IS BACK FILLED WITH INERT GAS AND CIRCULATED BY A FAN IN THE REAR UP TO 2 BAR PRESSURE.
- F.O.B.:
- SYRACUSE, NEW YORK
- TERMS:
- CHECK WITH PURCHASE ORDER, SUBJECT TO PRIOR SALE. YOUR INSPECTION IS INVITED AND SUGGESTED. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
SA 02/06/2024
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.