ITEM 4535
Click Any Image to Enlarge
- MANUFACTURER:
- CM FURNACE PUSHER
- TYPE:
- PUSHER FURNACE
- SIZE I.D.:
- 7.5"W x 72"L x 6"H
- SIZE O.D.:
- APPROX. 8'W x 60'L x 7'HIGH
- MODEL:
- 368-72-4Z
- SERIAL NUMBER:
- 220383
- MAXIMUM TEMP.:
- 3000 F (1650 C)
- ELECTRICS:
- 480 VOLTS, KW, 196 PHASE
- CONTROLS:
- DIGITAL INDICTING TEMPERATURE AND OVER TEMPERATURE CONTROL MOUNTED IN ENCLOSE PANEL
- GENERAL:
- HYDROGEN ATMOSPHERE PUSHER FURNACE UTILIZING 7.5"WIDE X 12"LONG BOAT SIZE. WORK PASSES THROUGH A 650 C (1200 F) 9' LONG 4 ZONE PREHEAT, 1200 C (2192 F) 9' LONG 4 ZONE PREHEAT, 1650 C ( 3000 F) 6'LONG 3 ZONE HIGH HEAT,, 3 ZONE 6 ' LONG COOLING AND EXIT THROUGH THE VETTICAL LIFT AIR OPERATED DOOR. EQUIPPED WITH NITROGEN & HYDROGEN FLOSCOPES, OXYGEN ANALIZER, DEW POINT MONITOR, HUMIDIFIER AND BURN OFF STACKS. FURNACE WAS PURCHASED NEW IN 2022 FOR $1,000.000 AND NEVER INSTALLED. HYRDOGEN AND NITROGEN GERATORS ARE AVAILABLE AND WILL BE QUOTED UPON REQUEST
- F.O.B.:
- BUYER TO LOAD ATLANTA, GA
- TERMS:
- CHECK WITH PURCHASE ORDER, SUBJECT TO PRIOR SALE. YOUR INSPECTION IS INVITED AND SUGGESTED. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
JB 04/06/2026
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
