ITEM 4554
Click Any Image to Enlarge
- MANUFACTURER:
- GASBARRE
- TYPE:
- CONTINUOUS BELT FURNACE
- SIZE I.D.:
- 36"W x 300"(25')L x 4.5"H
- SIZE O.D.:
- APPROX. x 75'L
- SERIAL NUMBER:
- 2023-1509
- MAXIMUM TEMP.:
- 1800 F`
- ELECTRICS:
- 480 VOLTS, 600 KW, 3 PHASE
- CONTROLS:
- ALLEN-BRADLEY PLC AND HONEYWELL UDC DIGITAL OVER TEMPERATURE CONTROLS MOUNTED IN A TWO DOOR ENCLOSED PANEL
- GENERAL:
- PARTS TO BE PROCESSED ARE DUMPED INTO A HOPPER LOADER AND METERED ON TO THE 36"WIDE VARIABLE SPEED MESH BELT (3-15" PER MIN) , PASS THROUGH 25'LONG HOT ZONE (FIVE 5'LONG ZONES) , 30'LONG COOLING (THREE 10' SECTIONS) AND UNLOADED AT 4' OPEN BELT UNLOAD AREA . HOT ZONE HAS AN ALLOY "D" SHAPED MUFFLE AND HEATED BY WIRE WOUND HEATING ELEMENTS ON CERAMIC TUBES. SET UP FOR USE WITH HYDROGEN AND NITROGEN ATMOSPHERE. RATED AT 2100 LBS/HOUR. NEW DECEMBER 2023 FOR $739,000, INSTALLED BUT NEVER USED IN PRODUCTION.
- F.O.B.:
- BUYER TO LOAD WATERBURY, CONNECTICUT
- TERMS:
- CHECK WITH PURCHASE ORDER, SUBJECT TO PRIOR SALE. YOUR INSPECTION IS INVITED AND SUGGESTED. CANCELLATIONS WILL NOT BE AGREED TO EXCEPT ON TERMS THAT WILL INDEMNIFY US AGAINST ANY LOSS.
JB 10/21/2026
NOTICE: DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES: The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the
goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a
thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.
